Kami menjual produk kikusui. Inilah beberapa produk kikusui yang kami jual :
Kikusui adalah produk alat ukur yang di bagi 2 bagian, yaitu Measuring Instrument dan Power Electronic Equipment.
1. Measuring Instrument di bagi beberapa tipe,yaitu : Test and Measure, Signal Generator, Jitter Meters,
Harmonic and Flicker Testers, Full Cell Impedance Meters,EMC Testers, Electrical Safety Testers,
& Battery and Capasitor Testers.
2. Power Electronic Equipment di bagi beberapa tipe,yaitu : Power Supply Control, Electronic Loads, &
DC Power Supplies
Setiap tipe memiliki keunggulan masing-masing.
Measuring Instrument :
1. Test and Measure
DME1600 Digital Multi Meter
OUTLINE
6 1/2 digit resolution, Essential device of "Electronic Measurement"
Supporting basic measurement with variety of options
The DME1600 is a digital multi-meter with a resolution of 6 1/2 digit. It can be performed up to 2000 times per second at the setting condition of 4 1/2 digit as fastest measurement, and it can measures 50 times per second when it is set for the 6 1/2 digit. The DME1600 offers fully function of measurement for the voltage, current, resistance, frequency and temperature which can be used various application of measurement and evaluation in design, development and debugging of electronics devices.The DME1600 provides USB and GPIB interface* as standard feature for automated measurement besides manual operation.Furthermore, the DME1600 offers wide range of options such as 20-channel multi-point scanner card supporting the basic measurement.
*Model with GPIB Interface : DME1600GC, DME1600SG
- Resolution : 6 1/2 digit
- Display : 5 x 7 dot matrix VFD, dual display with 3-color
- Basic measurement function
DC voltage : 0.1V, 1V, 10V, 100V, 1000V
AC voltage : 0.1V, 1V, 10V, 100V, 750V
DC current : 10mA, 100mA, 1A, 3A
AC current : 1A, 3A
2-wire / 4-wire resistance : 100Ω, 1kΩ, 10kΩ, 100kΩ, 1MΩ, 10MΩ, 100MΩ
Frequency : 3Hz to 300kHz
Continuity test
Diode test
Temperature test - Built-in USB Interface (GPIB Interface*: selected model)
KSG4310 FM/AM Stereo Standard Signal Generator
OUTLINE
Model KSG4310 is FM/AM stereo signal generator that cover a frequency range of 10 kHz to 280 MHz. Incorporating FM stereo and AM stereo (Motorola C-QUAM(TM )system) modulators, model KSG4310 is also highly desirable for their compact and labor-saving design.
It also incorporates several features and improvements, such as electronic attenuators for improved reliability, a variable AF generator, and a memory scan function, all added while keeping costs at low levels. As a result, the KSG4310 has become the standard in signal generators while at the same time offering superior cost performance.
- Signal generator, FM stereo modulator, AM stereo(C-QUAM) modulator, and AF generator incorporated into a single unit
- High resolution of 10 Hz in a full bandwidth and 8-digit display
- Setting resolution of 0.1 dB
- Equipped with electronic attenuators
- Internal modulation frequency can be arbitrarily set between 50 Hz and 15 kHz at resolution of 50 Hz
- Memory capable of storing 100 different panel settings
- EXT I/O port to expand the range of applications available
3. Jitter Meters
KJM6775 Time Interval DVD/ CD Jitter Meter
OUTLINE
The KJM6775 is an improved version of the KJM6765 and the KJM6755A which are widely used in the market. KIKUSUI proudly presents this cutting edge model developed to support the next generation media.
The KJM6775 is capable of 3 types of jitter measurement: RF to CLOCK jitter, Bi-Phase jitter, and wobble-jitter measurement. It provides a maximum frequency of 220MHz and high-speed processing with a maximum of 74MSPS for RF to CLOCK jitter measurement. This instrument is suitable for jitter measurement of high-speed optical drives and next generation discs. The PLL clock regeneration circuit supports the CD standard speed (as specified in the Compact Disc Reference Measuring Methods Specification Guideline Ver.1.0 May 1999), 2x, 4x, 8x speeds, as well as the DVD-ROM standard speed (as specified in the DVD Specifications for Read-Only Disc Ver.1.0 Aug. 1996), and 2x speed. Since the equalizer is equipped with an equalizer circuit for DVD-ROM standard speed, it is possible to perform measurements conforming to the DVD Book standard on an RF signal input from an optical pickup.
FEATURES
- DVD/CD compatible, clock frequency range: 4.0MHz – 220MHz
- High specs with maximum 74MSPS, minimum resolution of 25ps
- Built-in wobble-jitter measurement and Bi-Phase jitter measurement functions
- PLL clock regeneration circuits for CD standard speed, 2x, 4x, 8x speed,
- DVD standard speed and 2x speed
- Equipped with a DVD standard-speed equalizer circuit
KHA3000 Harmonic/Flicker Analyzer for IEC61000-3-2/3/11/12, IEC61000-4/7/15
OUTLINE
KHA3000, in addition to the complied standards and features of the KHA1000 (dedicated for single phase), is equipped for the harmonic and flicker compliance test exceeding 16A of the single-phase and three-phase equipment. With this unit alone, you can take highly accurate simultaneous three-phase measurements up to 40A/phase*. Furthermore, the KHA series is compliant with two measurement technique standards, the existing and the latest versions, so you can simply select to take measurements for the latest standard including interharmonics and for the conventional integral multiple harmonics without using any other device. In addition to the real-time display that can be used like an oscilloscope and FFT analyzer, the unit offers the real-time judgment of compliance with standards. Using this unit alone, you can judge test results and prepare result reports without the use of a PC. On top of that, you can easily set up a test system by combining KHA3000 with an AC power supply (PCR-LA Series) and a line impedance network (LIN40MA-PCR-L).
- Supports harmonic and flicker compliance testing of single-phase and three-phase equipment
- Installed with the latest standards of both harmonic and flicker limits
- No need for a PC for compliance testing
- Real-time measurement that gives you a quick grasp of the EUT status
KFM2150 System FC(Fuel Cell) Impedance Measurement System
OUTLINE
The KFM2150 system is a fuel cell impedance measurement system configured with an FC impedance meter KFM2150 and an electronic load PLZ-4W series. Combination of KFM2150 and PLZ-4WA series (0V input type) supports impedance measurement for single cell of fuel cell.
In addition to impedance measurement with AC impedance method, KFM2150 system provides IR measurement with current interrupt method.
Application software enables test for each characteristic of fuel cell such as I-V characteristics, Constant Current characteristics, Current Interrupt method and Cole-Cole plot by the AC impedance method. Moreover, each test can be performed in a specified order.
- Capable of measuring impedance in the frequency range from 10 mHz to 20 kHz.
- Parallel operation by same model of PLZ-4W series enhances current capacity and power capacity.
- Power capacity:
1000 W, 200 A, load input terminal: 1.5 V to 150 V (KFM2150 system 1000-01)
660 W, 132 A, load input terminal: 0 V to 150 V (KFM2150 system 660-01A) - Measuring AC current can be set from 0.1% to 10% (0.1% unit) of DC load current.
- Capable of IR measurement with the current interrupt method.
- Capable of varying DC load current while keeping measuring AC current setting (%).
- Equipped with low voltage protection
- External interface equipped as standard (RS-232C, GPIB, USB)
KES4021A/4022A-NEW- Electrostatic Discharge Simulator
OUTLINE
Electrostatic discharge (ESD) is a very common phenomenon. Yet, if the resulting arc current or electromagnetic wave were to flow through the circuits of an electrical or electronic device, the result could be a malfunctioning or even a breakdown. The IEC and other standardization bodies have been investigating ways of preventing this problem for many years, producing a Series of standards addressing methods and rules related to electrostatic discharge immunity testing. Recent years have seen an increased need for a means of performing discharge tests not only on domestic appliances, but also on automotive equipment. The KES4021A/4022A simulator allows you to perform immunity tests on an electrical or electronic device by simulating a direct or indirect electrostatic discharge from a charged human operator.
FEATURES
- Electrostatic discharge simulator that complies with the EN/IEC61000-4-2 standard
KES4021A/4022A is a slim, lightweight electrostatic discharge simulator that complies with the EN/IEC61000-4-2 standard. - Maximum testing voltage of ±30 kV exceeds all prescribed test levels
The simulator can produce a maximum testing voltage of ±30 kV, allowing testing at higher levels than those required by the IEC standard Level 4 (± 15 kV). This allows you to identify the limit voltages at which the product being tested either malfunctions or breaks down. - Support of ISO 10605 standard (*1)
By fitting a different CR unit and discharge chip in the discharge gun, you can use the simulator to produce the waveform prescribed in the ISO 10605 standard, which specifies electrostatic discharge test methods for evaluating electronic modules for automotive use.
TOS9213S [10kV DC] Hipot and Insulation Resistance Tester for PV Module
OUTLINE
The TOS9213S, DC Withstanding Voltage/Insulation Resistance Tester, is the test instrument that can handle the insuration test with high voltage and high resolution required for the evaluation of the PV module, Cable, Connector, and Junction Box. The TOS9213S is equipped with functions of the DC withstanding voltage testing and the insulation resistance testing accompanied with the features and performance of Kikusui's high-end model TOS9200 series, and it extends additional features and specifications exclusively applied to the PV module testing. Furthermore, the TOS9213S improves the current measurement accuracy of the DC withstanding voltage testing from the original specification of the TOS9000 series
FEATURES
- Up to 10 kV/5 mA with a maximum output of 50 W in DC withstanding voltage test
- Perform insulation resistance testing in the range of -25 V to -1000 V / 0.01 M to 9.99 G
- Applies for the testing of IEC61730-2 standard
- High-precision current measurement, 1 μA of the setting resolution for judgement
- Low output ripple of 100V p-p at 10 kV with consideration of capacitive load
- Rise-time control function makes a voltage to be increased slowly and it will not give effect of the stress to the PV module
- The judgement method of the insulation resistance test can be selected by using the current value in addition to the resistance value
- The phenomena of voltage appearance by the dielectric absorption, the forcible discharge timer function can be set up to 300 seconds
PFX2511 Charge/Discharge System Controller
OUTLINE
PFX2511 is a high performance Charge/Discharge system controller that enables measuring charge/discharge voltage and current of secondary batteries with high precision by combining our DC power supply and electronic load.
In these years, voltage (number of stack) and capacity (Ah value) of secondary batteries have become varied, and it is required to support the diversity for characteristic evaluation and the test equipment. However, general purpose test equipment cannot support measuring and evaluating large capacity batteries. Therefore, there was no choice but make the special system.
The PFX2511 equips with our technology of Charge/Discharge control and high accurate measurement required for battery characteristic evaluation. Combination of our DC power supply, electric load and the PFX2511 realizes configuring high precision battery test system with ease.
FEATURES
- The system for charge and discharge testing can be configured with the selected Kikusui's electronic load and the DC power supply.
- The applicable maximum voltage : 60.0000 V
- The applicable maximum current : 50.0000 A
- The operating mode : Charge mode (CC-CV, CC ) / Discharge mode (CC, CP, CC Pulse, CP pulse)
- Equipped with an electric input/output terminal, load switch (route switch circuit)
- Supports temperature measurement
- Equipped with the vibration sensor (auto stop function) .
- Included the application software "BPChecker2000 Basic edition (Up to 2CH)"
PIA4800 Series Power Supply Controller Supporting Multiple Channels
OUTLINE
The PIA4810 is a power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled.
Moreover, DC power supplies with a digital remote-control function, such as the Kikusui PAS, PAM(*1) and PMR Series, can be directly connected to the PIA4830 via a TP-BUS (twisted pair bus), enabling a system up to 32 channels to be controlled digitally.
PIA4820 is an expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed.
Then it is possible to use up to 3 units of PIA4820 as an expansion that can be connected to the PIA4810 via the TP-BUS, the system is capable of controlling a maximum of 32 channels. Moreover, the combined use of the GPIB and TP-BUS allows the system to control a maximum of 448 channels.
PIA4830 is a power supply controller only for digital control. It is capable of digitally controlling a system up to 32 channels of such Kikusui PAS, PAM(*1) and PMR Series DC power supplies via the TP-BUS.
2. Electronic Loads
PLZ6000R 6kW Regenerative DC Electronic Load (CC/CR/CV/CP/CC+CV/CR+CV)
PLZ6000R is a DC electronic load that regenerates load power to the AC line. Regular electronic loads consume load power by having semiconductor devices convert it into heat. By contrast, PLZ6000R converts load power into reusable electric power, rather than converting it into heat as is typically done, and feeds this power to the AC line, thereby substantially reducing the amount of waste energy. PLZ6000R is an environment-friendly electronic load that can contribute significantly to your energy saving efforts.
FEATURES
- Power regeneration efficiency of up to 90% (at rated power)
The use of a proprietary switching technology (patent pending) provides high power regeneration efficiency - from 85% or more at one-third of rated power (2000 W) to a maximum of 90% or more. This energy saving feature greatly reduces the electronic load's environment impact on your plant and it is not necessary to equip special cooling system such as water cooling method to supress the heat generation.
- No necessity of special cooling system such as water cooling method
Please view the movie about comparison with conventional E-load. The movie will help your understanding about effect of PLZ6000R. (To view the movie, Adobe Flash Player Ver.8 or later is necessary.)
- Aging and evaluation testing for DC/DC converters and various types of power supplies
- Evaluation and durability testing for alternators and motor generators
- Discharge testing for different types of batteries (lead, lithium, and assembled batteries)
- Dummy load testing for equipment powered by natural energy (solar cells and wind power generation)
- Evaluation testing for fuel cells and stacks
PWR Series Variable-switching Multi Range DC Power Supply (Switching system, CV/CC)
OUTLINE
The PWR Series offers constant voltage (CV)/constant current (CC) automatic crossover DC power supplies that enable you to combine a wide range of voltages and currents within the output power rating. For example, the model that has an output power rating of 1600W (PWR1600L) provides a seamless operation range from 80 V - 20 A to 16V - 100A. With a single PWR Series power supply alone, you can cover an extensive output range equivalent to what is provided by three to six conventional single range DC power supplies. L type can output up to 160% of the output current rating (in the continuous and intermittent extended operation areas). PWR1600L supports a maximum output of 10 V - 160 A.
FEATURES
- Seamless Quintuple Variable Voltage/Current Range
(Note: For H type, 3.25-time variable voltage/current range)
A single PWR series power supply supports an extensive operation range, covering an output range equivalent to what is provided by several conventional single range DC power supplies. Also, the maximum output powers of the power supplies of this series are 400 W, 800 W, and 1600 W - slightly higher than those of their predecessors. You can conduct tests without worrying about power limits. - Best for testing a wide variety of high-voltage devices including margin tests
The maximum output voltage of L type is 80 V. For example, 150% of 42 V (63 V) can be supplied for testing vehicular electrical components, or 150% of 48 V (72 V) can be supplied for testing communication equipment. In addition, the M type (320 V) is suitable for checking designs of energy-saving circuits for flat display panels and the development of new materials, while the H type (650 V) can be used to test various components and devices that use high voltages such as automotive devices, photovoltaic inverters, and many more. - Two Extended Operation Area Where up to 160% of the Output Current rating Can Be Output(L type only)
In the extended operation areas, the power supply can output up to 160% of the output current rating. This feature is convenient when testing an automobile motor or other load device that requires high current at startup time. Since the power supply can output continuous current up to 120% of the output current rating with the restricted ambient temperature range and current up to 160% of the output current rating with the restricted output time tests can be conducted with a power capacity one rank lower. This feature also helps you cut equipment costs and save floor space.
- Parallel or Serial Operation
Parallel operation enables multiple power supplies of the same model to operate in parallel, offering a large capacity of up to 8 kW (when five 1600-watt models are connected in parallel). In a serial operation, the voltage can be increased up to 160 V. (Note: Parallel and serial operations cannot be done at the same time.) - Up to 32 PWR series power supplies Can Be Controlled with One GPIB Address
The PWR series supports a digital communication function (TP-BUS) as its standard feature. When used with a power supply controller (PIA4830) to be purchased separately, the function enables up to 32 PWR series power supplies to be controlled using the GPIB or RS-232C interface. In addition, the sequence generation software (Wavy for PWR+PIA4830), also to be purchased separately, allows even those users who have no knowledge of any programming language to exert output control over the PWR series power supplies with sequence patterns of their choice and to read resultant data through the use of a PC.
*Note: To control PWR series power supplies using PIA4830, you need ROM Version 2.20 or later in the PIA controller.
Untuk informasi dan pemesanan hubungi contact kami.
| Nama Perusahaan | : | PT. TRIDINAMIKA JAYA INSTRUMENT Industrial | Electrical | General Supplier | Education | Instrumentation | ||||||||||||
| Alamat | : | Jalan Boulevard Raya Blok BA 3 No 15. Gading Serpong – Tangerang 15810 , Jakarta, Indonesia.
|
